Intrusion Detection Systems (IDS) are a vital part of a network-connected device. In this paper, we develop a deep learning based intrusion detection system that is deployed in a distributed setup across devices connected to a network. Our aim is to better equip deep learning models against unknown attacks using knowledge from known attacks. To this end, we develop algorithms to maximize the number of transferability relationships. We propose a Convolutional Neural Network (CNN) model, along with two algorithms that maximize the number of relationships observed. One is a two step data pre-processing stage, and the other is a Block-Based Smart Aggregation (BBSA) algorithm. The proposed system succeeds in achieving superior transferability performance while maintaining impressive local detection rates. We also show that our method is generalizable, exhibiting transferability potential across datasets and even with different backbones. The code for this work can be found at https://github.com/ghosh64/tabfidsv2.

The rapid advances in the Internet of Things (IoT) have promoted a revolution in communication technology and offered various customer services. Artificial intelligence (AI) techniques have been exploited to facilitate IoT operations and maximize their potential in modern application scenarios. In particular, the convergence of IoT and AI has led to a new networking paradigm called Intelligent IoT (IIoT), which has the potential to significantly transform businesses and industrial domains. This paper presents a comprehensive survey of IIoT by investigating its significant applications in mobile networks, as well as its associated security and privacy issues. Specifically, we explore and discuss the roles of IIoT in a wide range of key application domains, from smart healthcare and smart cities to smart transportation and smart industries. Through such extensive discussions, we investigate important security issues in IIoT networks, where network attacks, confidentiality, integrity, and intrusion are analyzed, along with a discussion of potential countermeasures. Privacy issues in IIoT networks were also surveyed and discussed, including data, location, and model privacy leakage. Finally, we outline several key challenges and highlight potential research directions in this important area.

Kurt Knutsson introduces you to EVE, a smart and versatile humanoid robot that uses a modified version of AI and Chat GPT-4 to handle a variety of tasks. Sometimes, we find ourselves in a situation where we urgently need an internet connection, but we are not at home or at work. We might want to do some online tasks, such as checking our email, browsing social media, or streaming our favorite show. However, what if the only available option is a public Wi-Fi network that we are not familiar with? How can we use it safely without exposing our privacy and security?

Network Intrusion Detection Systems (IDS) aim to detect the presence of an intruder by analyzing network packets arriving at an internet connected device. Data-driven deep learning systems, popular due to their superior performance compared to traditional IDS, depend on availability of high quality training data for diverse intrusion classes. A way to overcome this limitation is through transferable learning, where training for one intrusion class can lead to detection of unseen intrusion classes after deployment. In this paper, we provide a detailed study on the transferability of intrusion detection. We investigate practical federated learning configurations to enhance the transferability of intrusion detection. We propose two techniques to significantly improve the transferability of a federated intrusion detection system. The code for this work can be found at https://github.com/ghosh64/transferability.

In this paper, we explore transferability in learning between different attack classes in a network intrusion detection setup. We evaluate transferability of attack classes by training a deep learning model with a specific attack class and testing it on a separate attack class. We observe the effects of real and synthetically generated data augmentation techniques on transferability. We investigate the nature of observed transferability relationships, which can be either symmetric or asymmetric. We also examine explainability of the transferability relationships using the recursive feature elimination algorithm. We study data preprocessing techniques to boost model performance. The code for this work can be found at https://github.com/ghosh64/transferability.

This paper proposes a cyber-physical architecture for the secured social operation of isolated hybrid microgrids (HMGs). On the physical side of the proposed architecture, an optimal scheduling scheme considering various renewable energy sources (RESs) and fossil fuel-based distributed generation units (DGs) is proposed. Regarding the cyber layer of MGs, a wireless architecture based on low range wide area (LORA) technology is introduced for advanced metering infrastructure (AMI) in smart electricity grids. In the proposed architecture, the LORA data frame is described in detail and designed for the application of smart meters considering DGs and ac-dc converters. Additionally, since the cyber layer of smart grids is highly vulnerable to cyber-attacks, t1his paper proposes a deep-learning-based cyber-attack detection model (CADM) based on bidirectional long short-term memory (BLSTM) and sequential hypothesis testing (SHT) to detect false data injection attacks (FDIA) on the smart meters within AMI. The performance of the proposed energy management architecture is evaluated using the IEEE 33-bus test system. In order to investigate the effect of FDIA on the isolated HMGs and highlight the interactions between the cyber layer and physical layer, an FDIA is launched against the test system. The results showed that a successful attack can highly damage the system and cause widespread load shedding. Also, the performance of the proposed CADM is examined using a real-world dataset. Results prove the effectiveness of the proposed CADM in detecting the attacks using only two samples.

In this paper, a machine learning-based decentralized time division multiple access (TDMA) algorithm for visible light communication (VLC) Internet of Things (IoT) networks is proposed. The proposed algorithm is based on Q-learning, a reinforcement learning algorithm. This paper considers a decentralized condition in which there is no coordinator node for sending synchronization frames and assigning transmission time slots to other nodes. The proposed algorithm uses a decentralized manner for synchronization, and each node uses the Q-learning algorithm to find the optimal transmission time slot for sending data without collisions. The proposed algorithm is implemented on a VLC hardware system, which had been designed and implemented in our laboratory. Average reward, convergence time, goodput, average delay, and data packet size are evaluated parameters. The results show that the proposed algorithm converges quickly and provides collision-free decentralized TDMA for the network. The proposed algorithm is compared with carrier-sense multiple access with collision avoidance (CSMA/CA) algorithm as a potential selection for decentralized VLC IoT networks. The results show that the proposed algorithm provides up to 61% more goodput and up to 49% less average delay than CSMA/CA.

We propose a data-driven mean-curvature solver for the level-set method. This work is the natural extension to $\mathbb{R}^3$ of our two-dimensional strategy in [DOI: 10.1007/s10915-022-01952-2][1] and the hybrid inference system of [DOI: 10.1016/j.jcp.2022.111291][2]. However, in contrast to [1,2], which built resolution-dependent neural-network dictionaries, here we develop a pair of models in $\mathbb{R}^3$, regardless of the mesh size. Our feedforward networks ingest transformed level-set, gradient, and curvature data to fix numerical mean-curvature approximations selectively for interface nodes. To reduce the problem's complexity, we have used the Gaussian curvature to classify stencils and fit our models separately to non-saddle and saddle patterns. Non-saddle stencils are easier to handle because they exhibit a curvature error distribution characterized by monotonicity and symmetry. While the latter has allowed us to train only on half the mean-curvature spectrum, the former has helped us blend the data-driven and the baseline estimations seamlessly near flat regions. On the other hand, the saddle-pattern error structure is less clear; thus, we have exploited no latent information beyond what is known. In this regard, we have trained our models on not only spherical but also sinusoidal and hyperbolic paraboloidal patches. Our approach to building their data sets is systematic but gleans samples randomly while ensuring well-balancedness. We have also resorted to standardization and dimensionality reduction and integrated regularization to minimize outliers. In addition, we leverage curvature rotation/reflection invariance to improve precision at inference time. Several experiments confirm that our proposed system can yield more accurate mean-curvature estimations than modern particle-based interface reconstruction and level-set schemes around under-resolved regions.

We present a machine learning framework that blends image super-resolution technologies with passive, scalar transport in the level-set method. Here, we investigate whether we can compute on-the-fly, data-driven corrections to minimize numerical viscosity in the coarse-mesh evolution of an interface. The proposed system's starting point is the semi-Lagrangian formulation. And, to reduce numerical dissipation, we introduce an error-quantifying multilayer perceptron. The role of this neural network is to improve the numerically estimated surface trajectory. To do so, it processes localized level-set, velocity, and positional data in a single time frame for select vertices near the moving front. Our main contribution is thus a novel machine-learning-augmented transport algorithm that operates alongside selective redistancing and alternates with conventional advection to keep the adjusted interface trajectory smooth. Consequently, our procedure is more efficient than full-scan convolutional-based applications because it concentrates computational effort only around the free boundary. Also, we show through various tests that our strategy is effective at counteracting both numerical diffusion and mass loss. In simple advection problems, for example, our method can achieve the same precision as the baseline scheme at twice the resolution but at a fraction of the cost. Similarly, our hybrid technique can produce feasible solidification fronts for crystallization processes. On the other hand, tangential shear flows and highly deforming simulations can precipitate bias artifacts and inference deterioration. Likewise, stringent design velocity constraints can limit our solver's application to problems involving rapid interface changes. In the latter cases, we have identified several opportunities to enhance robustness without forgoing our approach's basic concept.

We present an error-neural-modeling-based strategy for approximating two-dimensional curvature in the level-set method. Our main contribution is a redesigned hybrid solver [Larios-C\'ardenas and Gibou, J. Comput. Phys. (May 2022), 10.1016/j.jcp.2022.111291] that relies on numerical schemes to enable machine-learning operations on demand. In particular, our routine features double predicting to harness curvature symmetry invariance in favor of precision and stability. The core of this solver is a multilayer perceptron trained on circular- and sinusoidal-interface samples. Its role is to quantify the error in numerical curvature approximations and emit corrected estimates for select grid vertices along the free boundary. These corrections arise in response to preprocessed context level-set, curvature, and gradient data. To promote neural capacity, we have adopted sample negative-curvature normalization, reorientation, and reflection-based augmentation. In the same manner, our system incorporates dimensionality reduction, well-balancedness, and regularization to minimize outlying effects. Our training approach is likewise scalable across mesh sizes. For this purpose, we have introduced dimensionless parametrization and probabilistic subsampling during data production. Together, all these elements have improved the accuracy and efficiency of curvature calculations around under-resolved regions. In most experiments, our strategy has outperformed the numerical baseline at twice the number of redistancing steps while requiring only a fraction of the cost.